Configuring the vehicle settings

You can configure the function for driving and related environments.

Warning

Make sure you stop the vehicle before changing settings to ensure safety.

Vehicle settings can be changed only when the vehicle is on.
Available settings may differ depending on the vehicle model and specifications.
Depending on the climate control system, some functions may not be supported.

On the All Menus screen, Press SETUP > Vehicle.

The Vehicle settings screen appears.

Configure the settings required.

Press > Setting search or press and enter a keyword to search for a settings item.

Driver assistance (if equipped)

You can set to use various systems that assist the driver for safety.

The screen may differ depending on the vehicle model and specifications.

Warning

Be sure to always check the road conditions while driving. The Driver Assistance system helps you drive safely and conveniently. Relying solely on the function may cause violation of traffic rules and regulations, resulting in an accident.
Be sure to control the vehicle by your judgment and keep traffic regulations for safety. When the function is active, drive the vehicle with keeping eyes forward and checking the surroundings.
Not all warnings or functions are necessary when they are active, and they do not replace the driver discretion under any circumstances. Stay focused on the road while driving.

Driving Convenience (if equipped)

Sets the properties of Driving Convenience system.

The Driving Convenience system operates based on the information from the navigation system so you must use the system only when the navigation system operates properly.
Smart Cruise Control: Configure the smart cruise control linkage or style settings.
LFA(Lane Following Assist): Automatic adjustment of the steering wheel to keep the vehicle centred on the lane.
Speed limit warning: Display of the current speed limit of the road.

Speed Limit (if equipped)

Sets the properties of the Speed Limit system.

Speed Limit Assist: Adjusts the vehicle set speed based on the current speed limit of the road.
Speed Limit Warning: Provides a warning when the speed limit is exceeded.
Off: Disables the Speed Limit functions.

Driving safety (if equipped)

Configure driving-related safety features.

Forward safety: Provides a warning and vehicle control when a risk of forward collision is detected.
Forward Safety Warning Timing: Sets the warning timing of the Forward Safety function.
Forward cross-traffic safety: Provides a warning and emergency braking when a risk of forward cross-traffic collision is detected.
Forward/Side safety: Provides a warning and emergency steering when a risk of forward or side collision is detected.
Lane safety: Automatically assists with steering to help prevent the vehicle from leaving the lane.
Blind-spot safety: Provides warning when a risk of blind-spot collision is detected and provides an emergency braking while exiting.
Blind-spot view: Displays the blind-spot view on the cluster when the turn signal switch is turned on.
SEA (Safe Exit Assist): Safe exiting from the vehicle by detecting traffic in the blind spot and providing a warning and exit control.
Safe Exit Warning: Provides a warning and door control when an approaching vehicle is detected in the vehicle's blind spot.

Warning timing (if equipped)

Sets the timing of the warning.

Warning volume (if equipped)

Sets the volume of the warning sound.

Haptic warning (if equipped)

Sets the intensity of the steering wheel vibration warning.

DAW(Driver Attention Warning) (if equipped)

Sets the properties of the Driver Attention Warning system.

Leading vehicle departure alert: Alerts the driver during a stop, when the leading vehicle departs.
Forward attention Warning: A warning is provided when the driver's gaze does not focus on the road.
Inattentive Driving Warning: Provides a warning when signs of driver inattentiveness are detected, and recommends a rest if needed.

Driving safety Off in N mode (if equipped)

Automatic disabling of driving safety systems when N mode is selected.

Forward safety (if equipped)

Sets the properties of the Forward Safety system.

Forward cross-traffic safety: Provides a warning and emergency braking when a risk of forward cross-traffic collision is detected.
Active Assist: Provides a warning and vehicle control when a risk of forward collision is detected.

Warning

The function is only a supplemental function and it is not intended to, nor does it replace the need for extreme care and attention of the driver. The sensing range and objects detectable by the sensors are limited. Pay attention to the road conditions at all times.

Warning Only: Provides a warning when a risk of forward collision is detected.
Off: Disables the Forward Safety functions.

Lane safety (if equipped)

Sets the properties of the Lane Safety systems.

Active assist: Automatic adjustment of the steering wheel to keep the vehicle centred in the lane.

Warning

Lane Keeping Assist is a supplementary function for safe driving and does not replace driving. It is the responsibility of the driver to always be aware of the surroundings and steer the vehicle.

When the lanes are not recognized well by front view camera, always check the surroundings because Lane Keeping Assist may not work properly.
Warning Only: Provides a warning when the vehicle leaves the lane without operating the turn signal switch.
Off: Disables the Lane Safety functions.

Blind-spot safety (if equipped)

Sets the properties of the Blind-Spot Safety systems.

SEA(Safe Exit Assist): Provides a warning and door control when an approaching vehicle is detected in the vehicle's blind spot.
SEW(Safe Exit Warning): Provides a warning when an approaching vehicle is detected in the vehicle's blind spot.

Caution

Safe Exit Assist may not operate properly when a vehicle is coming rapidly two lanes over from your vehicle or a vehicle is approaching at a fast speed from the rear in the lane next to your vehicle.
Safe Exit Assist may not operate properly if there is any vehicle or obstacle at the rear area of your vehicle.
Safe Exit Assist may be activated later than normal or may not operate properly if a vehicle is approaching fast from the rear of your vehicle.
Safe Exit Assist may not operate when the Blind-Spot Safety system malfunctions as follows:
The warning message of the Blind-Spot Safety system appears on the instrument cluster.
The sensors of the Blind-Spot Safety system are contaminated or covered.
The Blind-Spot Safety system does not generate warning or generates a wrong alert.

Active Assist: Provides a warning and vehicle control when a risk of blind-spot collision is detected.

Warning

Always be aware of road conditions while driving and be alert for unexpected situations even though Blind-Spot Collision Warning and Blind-Spot Collision-Avoidance Assist are operating.

Warning Only: Provides a warning when a risk of blind-spot collision is detected.
Off: Disables Blind-Spot Safety function.

Parking Safety (if equipped)

Sets the properties of the Parking Safety systems.

Camera Settings: Sets the properties of the cameras.
Surround View Monitor Auto On: Automatically activates Surround View Monitor when Parking Distance Warning is active.
Auto PDW(Parking Distance warning): Automatically activates Parking Distance Warning when traveling at low speeds.
Rear Safety: Provides a warning and emergency braking when a risk of rear collision is detected while reversing.
Rear cross-traffic safety: Provides a warning when a risk of rear cross-traffic collision is detected while reversing. It provides vehicle control to avoid collision, depending on the vehicle model and specifications.
Active Assist: Provides a warning and emergency braking when a risk of rear collision is detected while reversing.
Warning Only: Provides a warning when a risk of rear collision is detected while backing up.
Off: Disables Parking Safety functions.

Warning

Even though the vehicle is equipped the Parking Safety system, be sure to check any obstacles in the surroundings while driving. Relying on the Parking Safety system may cause an accident. Accordingly, be sure to control the vehicle by your judgment.
When the sensors cannot detect any obstacles due to the detection limit, it may cause an accident. Be sure to always check the surroundings while parking.

Drive mode (if equipped)

You can change the vehicle settings for driving conditions.

The screen may differ depending on the vehicle model and specifications.

Drive mode change alert (if equipped)

Configure the setting so that drive mode change notification is displayed along with the vehicle image when the drive mode is changed.

Tow Mode (if equipped)

Set the trailer weight to refer to when entering tow mode.

Eco mode climate control (if equipped)

Decrease the cooling/heating level to increase the drivable range.

Eco driving (if equipped)

Set the convenience features available for ECO vehicles.

The screen may differ depending on the vehicle model and specifications.

Coasting guidance (if equipped)

You can set the system to notify when to release the accelerator pedal to improve fuel efficiency.

Start coasting (if equipped)

You can set when to receive the accelerator release notification.

Smart Regenerative (if equipped)

Set to activate regenerative braking automatically based on the vehicle state or driving conditions.

Smart Regeneration (if equipped)

Adjusts regeneration level automatically according to the current driving situation.

Charging Connector Locking Mode (if equipped)

Configure the lock mode setting for the connected charging cable.

Charging Voice Prompts (if equipped)

Configure the settings so that voice information about charging status is provided as soon as charging begins.

To turn off the Charging Voice Prompts, press Off.

Green zone drive mode (if equipped)

When you are driving in an area that needs to improve air quality, set to drive in EV mode as much as possible.

Trailer Mode (if equipped)

Maintain driving performance and estimate the drivable range when a trailer is connected.

Active sound design (if equipped)

Turn on or off the engine sound function which generates a virtual engine sound.

The screen may differ depending on the vehicle model and specifications.

Active Noise Control (if equipped)

Adjust the interior engine sound volume.

Head-up display (if equipped)

you can set to use the head-up display that displays information such as driving speed and road-related information while driving.

The screen may differ depending on the vehicle model and specifications.

Enable Head-Up Display (if equipped)

Can determine whether or not to use the head-up display.

Display Control (if equipped)

Adjust the height, rotation, and brightness of the head-up display.

Content selection (if equipped)

Select the items to display on the head-up display.

Cluster (if equipped)

You can set the data to display on the instrument cluster and the volume and type for guiding beep.

The screen may differ depending on the vehicle model and specifications.

Brightness (if equipped)

You can set the instrument cluster display brightness.

Theme selection (if equipped)

Select and apply a theme to the cluster.

Service Interval (if equipped)

You can set to guide you when to perform the vehicle inspection.

Enable Service Interval: Sets the service inspection interval. When it exceeds, the notification is provided.
Distance: Sets the driving distance for a service.
Duration: Sets the service cycle.
Default: Initializes the settings for distance and duration.

Oil Life Monitoring (if equipped)

Shows the residual life of the engine oil.

Fuel economy auto reset (if equipped)

You can set to automatically initialize the average fuel economy.

After ignition: The average fuel economy is automatically initialize whenever you drive the vehicle.
After refueling: The average fuel economy is automatically initialize whenever you reful the vehicle.
Off: The average fuel economy initialize is unavailable.

Economy Display Mode (if equipped)

Select which average fuel economy to display on the cluster.

Content selection (if equipped)

You can set the content to display on the instrument cluster.

Gear position pop-up: Displays a pop-up when the gear position is changed.
Wiper/Lights display: When the wiper or light lever operates, the operation mode appears.
Traffic signs: Displays the road information such as speed bumps and speed limits.
Blind-spot view: Displays the blind spot view on the instrument cluster when the turn signal lamp is operating.
Icy road warning: When the outside temperature drop below 4℃, the possibility of road icing appears.

Cluster voice guidance volume (if equipped)

Adjust the voice guidance volume.

Tachometer Display (if equipped)

Selects the drive modes in which the tachometer is displayed.

Welcome sound (if equipped)

You can set to generate the notification sound when turning on or off the instrument cluster.

Climate (if equipped)

You can configure the operation environment for climate control system.

The screen may differ depending on the vehicle model and specifications.

Internal air circulation (if equipped)

You can set to keep the inside air pleasant by blocking inflow of outside air.

Activate upon Washer Fluid Use: Sets to automatically switch to the inside air circulation mode to prevent inflow of washer fluid scent when spraying washer fluid.

Automatic ventilation (if equipped)

You can set to prevent condensation inside and keep inside air pleasant using this feature.

Auto Dehumidify: Once the inside air circulation mode has been used for a long time, it is switched to the outside air inflow mode to prevent condensation.
Smart ventilation: Automatically ventilates the cabin at the scheduled time. Ventilation occurs while the vehicle is off.

Defog/Defrost Options (if equipped)

You can set to enable the defogger to secure driver visibility.

Defog/Defrost: When the sensor detects humidity on the windshield and glasses, it enables the outside air inflow mode and air conditioner for defogging and defrosting.
Auto Defog: When the sensor detects fog on the windshield, the automatic ventilation is run for defogging.

Climate Features (if equipped)

You can set or change the settings for the climate system.

A/C Automatic Drying: you can set the climate control system to dry the air conditioner by running when the engine is stopped.
Lock rear climate controls: Prevents changes to the climate control system from rear seats.

Seat (if equipped)

You can configure the settings of the steering wheel or seats, such as seat position change notification and automatic control of the steering wheel warmer.

The screen may differ depending on the vehicle model and specifications.

3rd row backrest folding (if equipped)

Adjust the 3rd-row seat back angle.

Seat change alert (if equipped)

You can set the system to display a notification message along with the seat image on the screen when a seat position is changed.

Seating Easy Access (if equipped)

For convenience upon getting on and off, you can adjust the position of the driver's seat or steering wheel to secure space inside the vehicle.

Easy seat access: Can set the distance to automatically move the driver's seat when getting on or off.

Heating/Ventilation (if equipped)

You can set to make the driving environment pleasant by controlling the steering wheel warmer and driver's seat Heating/Ventilation.

Rear seat heating/ventilation control (if equipped)

You can set to enable the heating/ventilation for the rear-left and rear-right seats.

Lights (if equipped)

You can configure the settings for vehicle lights.

The screen may differ depending on the vehicle model and specifications.

Ambient light (if equipped)

You can set the brightness and color of the ambient light.

Dimmed while Driving: Dimmed during night-time driving conditions
Link to drive mode: Changes the interor mood lamp color according to the drive mode.

One-touch turn indicator (if equipped)

You can set the number of turn signal lamp flashes when the lamp lever is operated.

Headlight time-out (if equipped)

You can set to turn off the tailights and headlights in 15 seconds after turning off the vehicle to ensure visibility.

HBA (High Beam Assist) (if equipped)

You can set to automatically control the high beam when an oncoming vehicle is approaching to decrease the high beam glare.

Interior Light Always On (if equipped)

Illuminates the interior buttons and switches at all times.

Door (if equipped)

You can configure the operation environment for the trunk(liftgate) and doors.

The screen may differ depending on the vehicle model and specifications.

Auto Lock (if equipped)

You can set the time to automatically lock all doors.

Auto Unlock (if equipped)

You can set the time to automatically unlock all doors.

Smart Trunk/Tailgate (if equipped)

Opens the trunk (tailgate) automatically when approaching the trunk (tailgate) with the smart key.

Remote Window (if equipped)

Turns on the remote window control function.

Approach unlock (if equipped)

Door handle(s) will rise and unlock when the smart key is nearby.

Convenience (if equipped)

You can configure the features for convenience such as welcome sound and wireless charging.

The screen may differ depending on the vehicle model and specifications.

Welcome mirror/light (if equipped)

You can set the welcoming time on the outside rear view mirrors.

Enable On door unlock: The welcome feature is enabled by the door unlock event.
Enable On driver approach: When the driver with the smart key approaches, the welcome feature is enabled.

Wireless charging system (if equipped)

You can set to charge your smartphone wirelessly.

This feature is available only is smartphones that can be charged wirelessly.

Auto rear wiper (reverse) (if equipped)

Activates the rear windshield wiper automatically when the front wiper is On and the gear is in reverse.

Rear safe distance indicator (if equipped)

When driving and operating the turn indicator.

Passenger Airbag (if equipped)

Enable the passenger seat airbag function.

Default

This menu is used to reset all display settings.

Press SETUP > Vehicle > Default > Yes.