Using the route menu

Planning a multipoint route

To build your route destination-by-destination, perform the following steps:

1. Press [] on the navigation view to access the navigation menu.
2. Press [Multipoint Route].

There is only one line in the list of route points, the starting point of the route, which is normally the current GPS position.

3. Press [Destination +] to select the destination. The [New Route to...] screen appears, where you can select the destination of the route the same way as described in the previous sections.
4. When the selected location appears on the map, press [Select as Destination] and the list returns. If needed, you can add further intermediate destinations.

5. To add more route points, press [Insert Waypoint] or Press [Final Destinatin] to change the final destination. The Add to Route... menu appears again, where you can select the new route point the same way as you have set the destination before.

, Note

Press [] to optimise the whole route or the order of waypoints. You can also delete all the destinations.

6. When you have added all the route points, Press [Calculate Route] and the planned route is automatically calculated.

Checking route information and alternatives

To get a map overview of the planned route and check different parameters of the planned route, perform the following steps:

1. Press [] on the navigation view to access the navigation menu.
2. In the navigation menu,Press [Route Summary].

Editing the route

When navigation has already started, there are several ways to modify the planned route.

You have the following options:

Setting a new starting point

For normal navigation, all routes are calculated from the current position. You can pause navigation to check future routes, simulate them or see their length in time and distance.

Then you can set the starting point of the route to a location other than the current GPS position.

1. Press [] on the navigation view to access the navigation menu.
2. In the navigation menu, press [Multipoint Route].

3. Press [Current GPS Position] > [Set Start Point] and confirm your action at the warning message.
4. Select the starting point of the route the same way you select a destination.

5. You can see the new starting point on the map. Press [Set Starting Point] and the multipoint route screen appears where you can continue adding a destination to your route.
6. Press [Calculate Route] to continue.

Adding an additional destination

To add a new intermediate destination to the planned route, perform one of the following actions:

• Press the map anywhere to browse it.

After selecting the location on the map, press [] > [Select as Waypoint] to add the selected location to your route as an intermediate destination. The other destinations of the route remain intact.

• Press [] on the navigation view and press [Multipoint Route].

Modifying the list of destinations

To edit your route, perform the following steps:

1. Press [] on the navigation view to access the navigation menu.
2. In the navigation menu, press [Multipoint Route].

• Press [] to delete all the destinations, or optimise the waypoints or the route.
• Press the name of the intermediate destination to move it up or down in the list, to save the location or to delete it from the list.
• If you have a route with at least one intermediate destination, you can delete the waypoint from the list right from the main menu. Press [Delete Waypoint], then confirm the deletion.

Saving the planned route

To save the planned route, perform the following steps:

1. Select a destination as described earlier and press [Select as Destination].

2. Press [] > [Save Route].

3. Type in a name and press [].

The route is saved and it is available in [New Route] > [Saved Routes].

Deleting the planned route

You have the following two options to delete the navigated route:

• Press [] to delete all the destinations, or optimise the waypoints or the route.
• In the navigation menu, press [Delete Route] or [Delete Waypoint]. If there are no waypoints, the planned route is deleted after a confirmation. If you have waypoints, you can choose to delete the whole route or only the next waypoint.

Selecting a route alternative when planning the route

To select from different route alternatives or change the route planning method after you have selected a new destination, perform the following steps:

1. Select a destination as explained earlier and go to the route confirmation screen.

2. Press [Alternatives].
3. You can see the basic details of route alternatives. Press any of them to see it on the map.

4. To view more suggestions, press [More Results] and scroll down for other alternative routes with different route planning methods.
5. Select one of the route alternatives and press [Select] to return to the previous screen. Press [Start Navigation] to start your journey. The orange line line now shows the new planned route.

Selecting a route alternative for an existing route

To recalculate the planned route with a different route planning method and to compare different route alternatives, perform the following steps:

1. Press [] on the navigation view to access the navigation menu.
2. You can access the list of route alternatives from the navigation menu in one of the following ways:

• Press [Detours & Alternatives] > [Alternative Routes].
• Press [Route Summary] > [Alternative].

3. You can see the basic details of a few route alternatives. Press any of them to see it on the map.

If there are suitable alternatives calculated with the route planning method that is selected in Route preferences, they are shown on top of the list. Routes with other route planning methods are shown at the bottom of the list.

4. Select one of the route alternatives and press [Select] to return to the previous screen. Press [Start Navigation] to start your journey. The orange line line now shows the new planned route.

Pausing guidance

When you are driving a planned route but you do not need guidance for a certain part of the route, you can suspend it and continue when it is needed again.

In the navigation menu, press [U] to suspend guidance or press [V] to resume guidance.